Site Overlay


PCI master Some modes allow to raise the performance up to Conclusion ASUS has created a perfect motherboard which can replace the Intel BX based boards on the market of high-efficient workstations and servers. The monitoring of the board and processors’ status is provided by the ASUS proprietary chip. There is a couple of LEDs near the connector. The controller may be switched off with a jumper on the board.

Uploader: Daicage
Date Added: 4 May 2007
File Size: 52.63 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 56218
Price: Free* [*Free Regsitration Required]

Apart from the board, a user’s manual, and a CD with drivers the complete set includes the following cables: Finally, I put a new Celeron flip-chip in the system, and tested for variation in the Norton benchmark. The overall boot time was also longer than normal for a clean system.

You can even mount a couple of the Thermaltake Golden Orbs. The Y axis is exaggerated in the chart below, to highlight what variability there was.

ASUS CUV4X-E, Socket 370, Intel Motherboard

The Norton scores went from an average of aboutto an average of about Of course, it is an operating system that chooses a processor for applications and not a user. Besides, there is a possibility to motherbard a booting order from the controllers – an integrated or an external ones. These are very significant performance variations that I could not account for. Unfortunately, even with a core voltage of 1. The only normal looking trace up there is the one labeled ‘reboot’, which I got after a warm reboot of the system.


The aeus from VIA was installed.

ASUS CUV4X, Socket 370, Intel Motherboard

There is no possibility for connection of one more thermistor. Testing The test mothetboard configuration: The Athlon system running on a VIA chipset motherboard showed very little variability. This occurred right after a fresh, cold boot, so it is inherent in the system. Unfortunately, there are not many tests for dualprocessor systems. I tried out a new Celeron-2 flip-chip. Although it is the ATX recommendation, not all cases have the corresponding bracket.

We used the q3crush. It took 57 seconds for a complete warm reboot, and 67 seconds for motherborad complete cold boot. Secondly, it’s necessary to use the required programs, e. The monitoring of the board and processors’ status is provided by the ASUS proprietary chip.

ASUS CUV4X-E, Socket , Intel Motherboard | eBay

I then set the 3D Mark demo to a continuous loop, and left it running overnight. Video 3Digests Video cards: That means when you turn the system on in the morning, it will be almost 20 seconds before you can tell that it has responded! Besides, it supports booting from the CD. After that we adjusted memory and CPU frequencies. I tried higher and lower core voltages, but the system refused to boot. Besides, for two MHz systems we received quite low scores.



After installation of the VIA 4 in 1 pack 4. I then overclocked the E chip to MHz, with a core voltage of 1. The U cable included in the set is “wrong”, and the UW one is “right”. Below is a graph of the kind of result that made me curious in the first place. Despite the fact that the board supports WOL it doesn’t work with the integrated network adapter.